Dentsply Xive® Titanium Straight Abutment Compatible 3.0mm / NP 3.4mm / RP 3.8mm / WP 4.5mm / 5.5mm

Titanium Straight Dentsply Xive Dental Implants Abutment

Dentsply Xive® Titanium Straight Abutment Compatible

3.0mm / NP 3.4mm / RP 3.8mm / WP 4.5mm / 5.5mm

Desciption:

This staight abutment comes with a screw that takes a Hex 1.2mm driver

This abutment is prep-able with a 1mm/2mm/3mm collar height. (Or according your customize request)

Material:
Ti 6AI-4V ELI (Supply from Germany)

Feature:

* Titanium interface abutment
* 1pc Screw Included

* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility

* Can production Custom interface

Approved by CE, ISO 9001, ISO 13485

Points of Dentsply Xive Abutment:

Xive® S

Titanium abutments are color coded (3.0 brown, 3.4 gray, 3.8 yellow, 4.5 blue and 5.5mm red) for easy identification in regards to the platform diameter. Four collar heights (1, 2, 3 and 5mm) in straight and angled (15 degrees) configurations are offered for titanium abutments. The angle of the angled abutment is machined in relation to the flat side of the indexing feature (hex). Each titanium abutment has a screw hole tapped in to the intended lingual wall of the abutment for possible horizontal screw fixation of the definitive restoration.

Xive® TG

Titanium abutments are not color coded and seat on any TG implant diameter (3.4 gray, 3.8 yellow and 4.5 blue). Machined straight and angled (15 degrees) with the angle of the angled abutment machined in relation to the flat side of the indexing feature (square). Each titanium abutment has a screw hole tapped in to the intended lingual wall of the abutment for possible horizontal screw fixation of the definitive restoration.

Dentsply Xive Implant Abutment

Titanium Straight Abutment

Ti 6AI 4V ELI Implant Abutment

Dentsply Xive® Titanium Straight Abutment Compatible 3.0mm / NP 3.4mm / RP 3.8mm / WP 4.5mm / 5.5mm Images